Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 15 , Article number: 45502 ( 2025 ) Cite this article
Rice production, a cornerstone of universal food security, is increasingly threatened by abiotic stresses. Among these, heavy metals and salinity have emerged as particularly severe constraints, significantly reducing yield potential and compromising grain quality. Owing to the limited understanding of the synergistic effects of these stresses, the grain quality in genetically distinct rice varieties from two key rice growing countries: Pakistan (Super Basmati [SB], Kala Shahkaku 282 [KS]) and Sri Lanka (Ambalanthota AT 362 [AT], Bathalagoda BG 94/1 [BG])was assessed. All the varieties were subjected to optimized concentrations of abiotic stress treatments like, salt (S; 150 mM NaCl), cadmium, (CD; 300 µM CdCl ₂ ), arsenic (AS; 250 µM Na ₂ AsO ₃ ), and their combinations (COM, S + AS, S + CD, CD + AS). The head rice yield was significantly reduced to 40–45% in KS and AT under combined stress, whereas the degree of milling increased to 42% in AT under combined stress. Among physical traits, average length ( r = -0.90) and arithmetic mean of grain ( r = -0.83) showed very strong negative correlations with sphericity, while L/B ratio ( r = -0.92) exhibited a very strong negative correlation with aspect ratio. High susceptibility was observed in SB and BG for cooking and functional property traits. An increase in volume expansion from 1.6 to 4.5 cm 3 and an elongation ratio 1.30 were observed under AS treatments in SB whereas COM increased elongation ratio to 1.35 in BG. Amylose content was strongly reduced by S + CD treatment to 8 mg/ml but increased to 40 mg/ml by S + AS compared with the control value of 30 mg/ml. Gel consistency in BG was also altered, shifting from soft (120 mm) to hard (30 mm) by COM, S + CD, S + AS, CD + AS compared with individual stress. Our study demonstrated that heavy metal and salinity stress differentially impaired the grain quality in economically significant rice varieties. Overall, KS displayed the notable stress tolerance and adaptability, while combined stress emerged as the most damaging treatment for grain quality parameters.
Rice ( Oryza sativa ), a staple crop for nearly half of the global population 1 , is primarily grown in Asia, with cultivation expanding over 40% area since 1961 from 115 million hectares 2 . The rising rice demand, driven by socioeconomic growth and health awareness 3 , has reinforced the need for effective strategies to improve grain quality as a long-standing research priority 4 . The grain quality in rice comprises nutritional components, milling, appearance, and cooking-eating attributes, which vary across regions and among different varieties 2 , 3 . Key indicators include amylose content, alkali spreading score and gel consistency 5 . Milling, essential for producing edible grains, affects both nutritional value and quality traits such as yield, head rice recovery, and appearance 6 . Commercial popularity in rice depends on cooking quality, sensory traits such as aroma, texture, taste, and consistency of grains, which are influenced by environmental and cultivation factors 5 , 6 . Importantly, the abiotic stresses have been reported to affect these quality attributes negatively 2 , 3 , 4 , 5 .
Salt stress is a leading factor that limits rice crop production worldwide reducing the yield by 30–50% annually in salty lands 5 . It particularly impacts the reproductive stages and the rice grain quality traits like amylose content, alkalinity stress, gel consistency which are highly sensitive to salinity 7 . Salinity levels exceeding 3.0 dS/m significantly reduce rice yield, particularly by decreasing panicle number, and can lead to a 50% reduction in grain yield at 6.0 dS/m 7 , 8 , 9 . Salt-tolerant cultivars mitigate yield loss through higher grain filling and weight and maintain superior milling, appearance, and cooking quality compared to susceptible cultivars 10 .
In addition to salinity, heavy metal contamination is another major factor impacting rice crop health and productivity 6 . Rice tends to accumulate higher concentrations of arsenic (AS) and cadmium (CD) in its tissues compared to other crops 11 with reported grain concentrations exceeding the permissible limits 12 . Cadmium is absorbed via roots and translocated to grains, phloem mediated transport and ultimately affects the grain quality 5 , 13 , 14 . Cadmium negatively impacts aromatic and non-aromatic rice grain quality, significantly by reducing protein, amylose content, milled rice percentage and brown rice rates 6 , 15 , 16 .
Arsenic, a toxic non-essential metalloid, poses serious risks to rice yield, quality, and human health, potentially affecting 5.5 billion consumers worldwide 7 , 17 . Rice can accumulate up to ten times more AS than other cereals, particularly under flooded conditions that enhance AS solubility and uptake 18 . Silicon transporters inadvertently facilitate arsenite uptake, making rice a key dietary source of arsenic even in areas with low AS in water. Grain AS varies with variety and environmental condition, with genetic factors playing a significant role 19 . Arsenic contamination in rice significantly alters grain quality attributes, elemental profiles, and cooking properties. High-yielding and indigenous varieties respond differently due to strong genotype environment interactions 18 .
The literature indicates that studies on rice grain quality are ranked second in frequency. Mainly, all such studies have analyzed grain physiology and mineral accumulation while fewer have focused on the effects of abiotic stress on rice grain quality. However, a few papers have analyzed grain quality under salinity 21 and heavy metal stress, particularly involving cadmium and arsenic. Although the detrimental impacts of salinity 18 , cadmium, and arsenic stresses on rice grain quality have been widely reported in isolation 21 , their combined effects, particularly during the sensitive growth phase from panicle initiation to maturity, remain poorly understood. With climate change and soil degradation increasingly exposing rice crops to multiple concurrent stresses, there is a pressing need to investigate how these interactions affect grain quality. To address this gap, the present study systematically evaluated the individual and combined impacts of salinity, cadmium, and arsenic on milling, physical, cooking, and functional quality traits in economically important rice cultivars. The findings provide novel insights into the interplay between abiotic stress and rice grain quality and highlight the synergistic effects of heavy metals and salinity in rice yield attributes.
Paddy weights were reduced significantly under all treatments across all varieties. However, KS variety is significantly affected by CD stress compared to all other treatments ( p < 0.0007). Among all varieties BG variety highly affected under all stress ( p <0.001). Salinity stress notably reduced paddy weight in the BG variety more than in the other varieties ( p <0.0001) (Figure 1 : A). Paddy weight showed a mild negative Pearson correlation with the degree of milling ( r = −0.18), while it showed a positive correlation with other traits (Figure 1 : G). Dim1 explained 71.8% of the variance (Figure 1 : H). This is clearly represented in the heatmap, where all controls of all varieties showed positive correlations (Figure 1 : I) and clustered separately (Figure 1 : J). Brown rice analysis indicated significant effects of treatments across all varieties. However, with SB under SCD treatments ( p <0.02) and BG under AS ( p <0.04) showing the most pronounced reductions (Figure 1 : B) A mild negative Pearson correlation showed with degree of milling ( r =−0.12) while positive correlations were found with other traits. In contrast, polished rice weight/milled rice weight was most severely impacted in the AT under COM ( p <0.03) (Figure 1 : C). It showed a strong negative Pearson correlation ( r =−0.67) with degree of milling compared with all other treatments across all varieties (Figure 1 : G). Head rice weight was markedly reduced in SB, with AS ( p <0.0211) stress having a more pronounced effect than other treatments (Figure 1 : D). The degree of milling increased significantly across all treatments and varieties compared to the control, with a particularly notable increase in the AT variety under COM ( p <0.0211) stress conditions (Figure 1 : E). Lastly, head rice yield was significantly reduced in all varieties compared to the control. SB was most affected by salinity stress, whereas KS and AT were more adversely impacted by COM stress, followed by BG under arsenic stress (Figure 1 : F). It shows a strong negative Pearson correlation with degree of Milling ( r =−0.70) (Figure 1 : G).
Milling Properties of Rice Grains. Different colored bars, accompanied by error bars, represent various varieties, while the X axis indicates the specific treatment and variety. The start (*) denotes significant differences compared to the control. Significant level determined by α = 0.05. As the number of star marks increases, the level of significance also increases (Fig. 1 : A-F) * p < 0.05, ** p < 0.01, *** p < 0.001, **** p < 0.0001. Error bars showed standard error mean values, analyzed using two-way ANOVA (Tukey test), with repeated measures as shown in the Supplementary table S1 . The correlation was determined using Pearson correlation coefficient. The degree of milling was strongly negatively correlated with head rice weight, milled or polished rice weight, and head rice yield Fig. 1 : G). The PCA biplot presented illustrates the distribution of data points and variable loadings across two principal components, Dim1 and Dim2, which collectively explain 71.8% and 20% of the variance in the dataset, respectively. The horizontal axis (Dim1) accounts for most of the variance (71.8%), indicating that it is the dominant component in terms of data variability, while the vertical axis (Dim2) explains an additional 20% of the variability (Fig. 1 : H). The heatmap illustrates the hierarchical clustering of milling property traits across different varieties and treatment combinations. The color gradient from white to red indicates the magnitude and direction of the correlation, ranging from negative (white) to positive (blue). Higher positive correlations are represented by darker blue tones, while stronger negative correlations are depicted in lighter blue to white shades. All varieties control were strongly positively correlated with all abovementioned traits except degree of milling whereas ATCOM and KSCOM both were shown opposite to their control. However, SBCOM and BGCOM both have similar correlations (Fig. 1 : I). Among all treatments, ATCOM is clustered separately, whereas BGCOM and SBCOM are grouped in the same cluster but on different branches (Fig. 1 : J).
This study involved analyzing the physical properties of paddy and rice grains based on scanning data and relevant computational equations. For the salt treatment, the SB (p>=0.05) and KS ( p <0.03) varieties showed significant differences in thickness traits, whereas for the cadmium treatment, the KS ( p <0.0001) and AT ( p =0.034 varieties showed highly significant differences as indicated by the ANOVA results (Supplementary table S2 and S3). This was further supported by the Pearson correlation with average length ( r =−0.60, r =0.90) and arithmetic mean ( r =−0.84, r =−0.44) and L/B ratio ( r =−0.63, r =−0.58) showed strong correlation with aspect ratio and sphericity. However, thickness ( r =0.11), weight ( r =0.17), breadth( r =0.20), width( r =0.23), surface area( r =0.33) showed positive Pearson correlation with aspect ratio.
Correlation of Grain and Paddy Physical Properties. The Pearson correlation represented by a color gradient from blue to red, indicated values ranging from negative to positive. Most traits including volume, equivalent diameter, size, geometric mean diameter, average length, arithmetic mean diameter, thickness, weight, width, breadth, and surface area displayed strong positive correlations with one another (Fig. 2 : A). In figure B, paddy varieties and treatments are represented by the letter ‘P’, while ‘G’ represents grains. Dim1 accounted for 46% of the variance, and Dim2 explained 22%. Most paddy varieties and treatments showed a positive variation along Dim1, except for SBCOMP and SBSCDP, which showed negative variation. In grains, the AT variety under treatments S, SAS, COM, AS, SCD, and CD showed negative correlations with both Dim1 and Dim2 and was negatively correlated with sphericity and aspect ratio (Fig. 2 : B). The heatmap integrates both sample clustering (rows) and trait clustering (columns) to visualize the overall patterns of similarity and divergence. The vertical dendrogram groups varieties and treatments based on similarity in trait expression, while the horizontal dendrogram clusters the traits based on co-occurrence patterns. In the variety–treatment combinations for grains, moisture in SBAS, bulk density in BGAS, porosity in ATSCD, and true density in SBSCD exhibited a very strong correlation (Fig. 2 :C). In contrast, for paddy, moisture in ATC, and bulk density, width, and true density in SBSCD showed a very strong correlation (Fig. 2 : D), indicating potential variety-by-treatment interactions influencing the physical properties of grains and paddy. Control samples of both paddy and grains were generally grouped together, apart from the AT grain control, which clustered separately. Paddy samples of the AT variety treated with AS, CD, CDAS, and COM formed their own separate cluster, suggesting treatment specific divergence between grain and paddy physical traits in this variety (Fig. 2 : E). The physical appearance of the grain is shown by using scale bar (2 mm) (Fig. 2 : F).
In the SB variety, the COM ( p < 0.0001) treatment exhibited the highest percentage of curling grains compared to all other treatments. Among the four varieties, BG displayed a significantly higher curling percentage, primarily because the control treatment did not induce any grain curling (Fig. 3 : A). It showed negative Pearson correlations with volume expansion ( r =−0.03), bursting grain (−0.03) and positive correlation with stickiness ( r = 0.02) and elongation ratio ( r = 0.11). The AS treatment significantly increased the elongation ratio in SB, AT ( p < 0.02) compared to their respective controls. This was further supported by a mild negative Pearson correlation with volume expansion ( r =−0.19) and bursting grains ( r =−0.08) (Fig. 3 : B). Interestingly, no grain bursting was observed in the control samples across all varieties. In contrast, significantly the highest bursting percentage was recorded in the AT variety under the SCD treatment ( p < 0.0001)). The lowest bursting percentages (8%) were observed in the SB variety under the AS ( p > 0.06) and SCD treatments ( p > 0.056) (Fig. 3 : C). Volume expansion increased significantly in variety SB under all the treatments compared to control, with the highest expansion observed under the AS treatment ( p < 0.0211). Among all the variety and treatments, the most pronounced reduction in volume expansion was observed in the KS variety under the AS treatment ( p < 0.0001) (Fig. 3 : D). Apart from the AS treatment in the BG variety, all treated and control grains across all varieties exhibited well-separated grains, corresponding to a stickiness score of 4. Interestingly, the AS treatment in the BG variety resulted in slightly sticky grains, with a significantly lower stickiness score, indicating a notable impact of this treatment (Fig. 3 : E).
Comparison of Cooking Characteristics in Control and Treated Rice. The color gradient from yellow to blue represents different varieties (A-E), SB, BG, KS, and AT, respectively. Stars indicate statistically significant differences between stress treated and control groups within variety at the 0.05 confidence level. Error bars showed standard error mean values. Stickiness was presented as ordinal data, with scores of 4(well separated), 3(moderately separated), 2 (slightly sticky) and 1 (not sticky). The start (*) denotes significant differences compared to the control. Significant level determined by α = 0.05. As the number of star marks increases, the level of significance also increases (A-F) * p < 0.05, ** p < 0.01, *** p < 0.001, **** p < 0.0001. Error bars showed standard error mean values, analyzed using two-way ANOVA (Tukey’s test), with repeated measures as shown in the Supplementary table S4. The Pearson correlation is shown by the colour gradient. Volume expansion showed a weak positive correlation with stickiness (0.08) but negative correlations with all other traits, including bursting grains (−0.19), elongation ration (−0.07), and number of curling grains (−0.23) (Fig. 3 : F).The PCA biplot was constructed using the first Principal Component, Dimensions 1 (Dim1), which accounted for 27% of the total variance, and Principal Component, Dimensions 2 (Dim2), which explained 25%. The length and orientation of the trait vectors indicate the strength and direction of their correlation with Dim1 and Dim2 (Fig. 3 : G). The elongation ratio showed a slight negative correlation with Dim1. All eight treatments of the SB variety exhibited a positive correlation with stickiness and volume expansion along Dim1. The heatmap presented a color gradient visualization illustrating the correlations between treatment, varieties, and various traits. The gradient ranged from white to blue, indicating the spectrum from strong negative to positive relationships. BGAS only exhibited a very strong negative correlation with stickiness, whereas all other varieties showed positive correlation with stickiness. KSSAS was the only variety that showed a very strong positive correlation with elongation ratio, the other exhibited negative correlation (Fig. 3 : H). Two distinct clusters were observed, each forming an independent branch, one terminating with BGAS, which showed a strong inverse correlation with stickiness, and the other ending with KSSAS, which was strongly positively correlated with the elongation ratio (Fig. 3 : I).
A comparison between paddy and grain physical properties revealed that volume, equivalent diameter, size, geometric diameter, average length, arithmetic diameter, thickness, weight, width, breadth, surface were all strongly correlated with each other. In contrast, aspect ratio and sphericity showed negative correlations with the other twenty-one physical parameters. Moisture content showed negative correlations with kernel shape, length, color index, whiteness index, aspect ratio, sphericity, thickness, and weight, but positive correlations with other paddy and grain traits. Strong negative correlations were observed between average length and sphericity ( r = − 0.9), and between aspect ratio and L/B ratio ( r = − 0.92), while whiteness and color indices were strongly positively correlated ( r = 0.99), as were volume, equivalent diameter, size, and geometric diameter. PCA revealed that most physical traits were positively associated with Dim1 (46% variance), except for color index, whiteness index, sphericity, and aspect ratio, which showed negative correlations, especially in AT, BG, and KS under CD and S treatments. SB showed the most variation across traits, while KS showed the least. Clustering analysis revealed distinct separation between paddy and grain under stress treatments, with AT control grain clustering near treated AT paddy. Significant differences were found between paddy and grain across varieties under AS, S, and CD, except for sphericity, L/B ratio, and porosity, while COM significantly affected only moisture. Overall, abiotic stress treatments disrupted the physical integrity of both paddy and grain.
The functional properties of rice grains were assessed through amylose concentration, gel consistency and alkali spreading value and aroma. Across all varieties, control C exhibited high amylose content, with BG control displaying very prominent levels. COM treatment consistently reduced amylose content to either low or intermediate levels in all varieties. Interestingly, AS treatment increased amylose content in BG and AT ( p < 0.01) variety but decreased it in SB and KS ( p < 0.0211) when compared to their respective controls. Salt treatment (S) had no significant effect on amylose content in the AT ( p > 0.05) variety but led to decreased levels in SB, BG, and KS varieties ( p < 0.02). Cadmium treatment (CD) notably reduced amylose in KS ( p < 0.001) variety but did not affect amylose content in AT and BG varieties ( p > 0.05), where prominent levels were maintained (Fig. 4 : A). It showed mild Pearson negative correlation with aroma ( r = −0.09), alkali spreading digestion( r =−0.27) while positive Pearson correlation with gel consistency ( r =−0.06) (Fig. 4 : E). However, amylose content showed very strong positive correlation with following variety and genotype interactions, SBAS, SBSAS, BGC, BGAS, ATCD and ATAS.
Functional properties of rice grains under control and stress treatments across varieties. Varieties were indicated by color-coded bars. Statistical comparisons were made between treatment and control within each variety. The start (*) denotes significant differences compared to the control. Significant level determined by α=0.05. As the number of star marks increases, the level of significance also increases (A-F) * p < 0.05, ** p < 0.01, *** p < 0.001, **** p < 0.0001. Error bars showed standard error mean values, analyzed using two-way ANOVA (Tukey’s test), with repeated measures as presented in the Supplementary table S5. Gel consistency was categorized by S-soft, I-intermediate, H-hard and Alkali spreading value: L-low, I-intermediate, H-high. The aroma is shown N = no aroma, L = low, M = medium, and H = high.
In the SB variety, gel consistency was significantly affected by salt (S) treatment, shifting from soft (as in the control) to intermediate ( p < 0.02). In the BG variety, treatments SAS, SCD, and CDAS significantly altered gel consistency from soft (control) to hard ( p < 0.0001), while all other treatments preserved the soft texture. However, this was further supported by a strong negative Pearson correlation with aroma( r =−0.28) and alkali spread digestion( r =−0.17) and, as well as a positive correlation with amylose (0.06) (Fig. 4 : B). In contrast, Alkali spreading digestion was significantly affected by AS treatment in the SB variety, increasing from a low value (score 1) in the control to a high value (score 6). In the BG variety, COM ( p < 0.001) treatment altered the alkali spreading value from low (control, score 1) to high (score 7) (Fig. 4 : C).
Sensory attribute, aroma was significantly influenced by the abiotic stress in rice grains. The SB and KS varieties are recognized for their strong aromatic qualities. However, aroma intensity was markedly reduced under stress conditions. In the SB variety, the COM treatment reduced aroma from medium (control, score 3) to low (score 2) ( p < 0.001), while all other treatments significantly diminished aroma to undetectable levels (score 0). In contrast, the BG variety, which typically exhibits no aroma (control, score 0), showed enhanced aromatic expression under stress. The COM treatment increased the aroma to an elevated level (score 4) ( p < 0.02) (Fig. 4 : D). The ANOVA variance affecting the cooking properties, functional properties (cooking processing traits and sensory attributes across the treated rice grains were shown in Supplementary Table 5).
Notably, alkali spreading digestion score displayed an extraordinarily mild negative Pearson correlation with amylose content( r =−0.09), a moderate negative correlation with gel consistency( r =−0.28), and a mild positive correlation with aroma(r = + 0.27) (Fig. 4 :E).The treatment SBSCD( p < 0.0211) exhibited an extraordinarily strong negative correlation with amylose content, whereas treatments such as SBSAS, BGC, BGAS, ATAS, ATCDAS, SBC, BGS, ATAS, KSC, KSSCD, and ATCD( p < 0.001) showed extraordinarily strong positive correlations. Treatments including KSC, BGSCD, ATS, ATAS, BGCDAS, KSCDAS, KSAS, and BGSAS demonstrated mild negative correlations with gel consistency( p < 0.0001), while BGCOM, ATCOM, SBCOM, ATSCD, SBC, ATSAS, ATCDAS, BGC, BGCD, SBCD, and BGS showed very strong positive correlations( p < 0.0253). (Fig. 4 : F).
The biplot displays the first two principal components, Dim1 (39%) and Dim2 (24.7%), together explaining 63.7% of the total variance. The direction and length of each vector indicate the strength and influence of the respective trait on the principal components. SBAS, SBSCD, and other SCD/SAS treatments cluster toward traits associated with aroma and alkali spreading digestion, indicating a strong positive association. (Fig. 4 : G).
Notably, KSCOM and BGCOM clustered closely within the same main group, due to their similar profiles. Both exhibited an extraordinarily strong positive correlation with aroma and alkali spreading digestion, and strong negative correlations with amylose content. However, they differed slightly in their relationship with gel consistency BGCOM showed a strong positive correlation, while KSCOM showed a negative correlation. Additionally, ATCD clustered closely with ATC, suggesting a strong similarity in their functional traits. Likewise, KSS and SBS formed a close pair, reflecting highly similar responses across the measured traits (Fig. 4 : H).
All experimental findings were incorporated to support informed preferences for variety selection following abiotic stress exposure.
Variety performance analysis of rice under various abiotic stress conditions. The figure illustrates the comparative response of different varieties based on integrated traits, including milling quality, physical appearance, cooking characteristics, and functional properties, highlighting their adaptability and resilience under stress. Varietal adaptability under abiotic stress was evaluated using a preference rating scale of 4 (best), 3 (better), 2 (good), and 1 (poor) across milling quality, physical properties, cooking characteristics, and functional traits.
The KS variety demonstrated the highest overall adaptability, scoring four in milling quality, physical properties, and functional traits. In contrast, SB was the most adversely affected variety, receiving scores of two for milling and cooking properties, one for physical properties, and two for functional traits. The Sri Lankan variety AT received the highest rating (4) for cooking properties but scored three across the remaining traits. BG was ranked third overall in adaptability under stress conditions (Fig. 5 ).
Distinct variations among treatments were observed, suggesting that stress combinations influenced quality parameters in unique ways.
Stress risk assessment of rice varieties under abiotic stress conditions. The figure illustrates the relative impact of seven abiotic stress treatments on key grain quality parameters including milling properties, physical characteristics, cooking quality, and functional traits across all varieties, highlighting the worst abiotic stress. Ratings were assigned as follows: 1 = highly adverse effect, 2 = moderate effect, 3 = mild effect, and 4 = no effect.
Based on the findings, the COM treatment exerted a highly adverse effect on all varieties in terms of milling properties, physical attributes, and cooking quality, while its impact on functional traits was moderate. AS treatment significantly affected milling and physical properties but showed moderate effects on cooking and functional trait. The S treatment strongly affected cooking and functional traits but had only mild effects on milling and physical properties. Lastly, CD treatment had a pronounced impact on functional traits, moderate influence on cooking properties, and mild effects on milling and physical parameters. These findings highlight that the interaction of treatment can exacerbate quality deterioration in rice grains beyond the effects of individual stress factors (Fig. 6 ).
Rice grain quality is a complex trait that involves the interaction of genetics and environmental factors. The major components, milling, physical attributes, nutritional and cooking properties are particularly important which are affected by the stress factors 6 . It is crucial to investigate these components and identify the most damaging stress. This study evaluated rice grain quality across key parameters, including milling, physical (appearance), cooking, functional (processing), and sensory traits under salt, cadmium, arsenic, and their combined effects in economically important rice cultivars. All treatments led to an increase in the degree of milling across varieties compared to their controls. Previous studies have shown that a higher degree of milling can reduce heavy metal concentrations in rice grains, with reductions observed in Cd (3%), Pb (29%), Cu (6%), and Zn (15%) 20 . Additionally, under 51.3 mM NaCl, significant decreases in brown rice rate, milled rice rate, and head rice rate have been reported 9 , 21 . In present study, all treatments led to an increase in the degree of milling across varieties compared to their controls. The highest degree (41%) of milling was observed under COM in the AT. The lowest milling degree (6.0%) was recorded in SB under SCD conditions. All stress treatments significantly reduce paddy weight, with cadmium having a more pronounced effect in BG (5.6 g to 4.12 g) and KS (5.4 g to 4.14 g). Brown rice weight was also significantly reduced under all treatments in all varieties. Individual arsenic and its combination with salt stress strongly affected the brown rice weight in BG grains probably because of the presence of DMA in endosperm which might have aggravated by the As treatment 6 . The recently characterized peptide transporter OsPTR7 has been implicated in arsenic detoxification, suggesting a mechanistic role in mitigating heavy metal stress in rice 22 . Similarly, the strong effects of CD and SCD treatments on KS and SB appear to be mediated through the waxy gene pathway, which contributes to reducing white belly formation in brown rice under Cd stress 23 , as also supported by our findings. Furthermore, during grain filling, Cd-induced suppression of pyruvate kinase genes (OsPK1, OsPK4, OsPK9, and OsPK10) disrupts energy metabolism and alters the ABA/GA hormonal balance, ultimately compromising grain yield and quality 24 . A similar trend was observed in SB under Salt stress, KS under cadmium, AT under COM where significant polished rice weight loss occurred. However, significant reductions occurred under AS in BG (43%), because during early grain filling, arsenic mainly enters the grain directly but later moves circumferentially. Arsenite accumulates in the bran aleurone layer near the ovular vascular trace, where it is sequestered as arsenite glutathione complexes in vacuoles, limiting further movement. At higher arsenic levels, this capacity can be exceeded, allowing arsenic to reach the sub-aleurone layer 24 that might have resulted in reduced grain yield in our study. The findings of current study are consistent with prior studies where salt stress led to a marked reduction in head rice 25 .
Grain appearance, a key determinant of rice quality and marketability, is the most visibly affected trait under abiotic stress because it primarily alters the physical properties of the grain through changes in the spikelet hull and endosperm tissues 26 . In the present study, grain length and width were significantly reduced under all stress treatments across varieties compared to controls. This could be regulated by the ubiquitin proteasome system, where TUD1-D1/RGA1, OsGRX8/WG1, GW6a/OsIHA1, and HDR3 promote grain length, while CLG1 represses GS3 to reduce length 26 . In this study, the observed grain length reduction in all varieties might possibly be due to both Cd transport and its accumulation in roots. Rice varieties have been reported to be different in Cd uptake and involve various mechanisms, like sequestration through cell wall binding, vacuolar storage, and regulation of OsHMA3 gene. Indica rice, lacking functional OsHMA3, has shown higher Cd levels in roots and shoots 27 . These insights highlight root-based detoxification and OsHMA3 role in limiting Cd transfer to edible grains 28 and grain reduction 29 .
Salinity stress markedly reduced grain thickness through the auxin signaling pathway (via OsAUX3 and OsYUC11) 5 . The gibberellin (GA) pathway, mediated by GW6, has also been reported to reduce grain thickness, while the cytokinin pathway, involving OsPUP4 and BG3, can contribute further to reducing the grain thickness 30 . Our observation showed that all stress treatments led to a reduction in thickness. The most significant decrease was observed in KS, SB, and BG varieties as compared to control, but the AT variety was comparatively less affected. Among all treatments and varieties, the COM, S treatment consistently resulted in a significant reduction in thickness might have occurred through the involvement of cross talk between auxin and gibberellin as in one of our related experiments the genes related to these hormones were significantly higher in these treatment groups (data not published). Furthermore, heavy metals and salt stress have been reported to affect these factors 22 , 31 , 32 , 33 . However, AT grain size was affected significantly by salt stress as this is a salt sensitive variety 34 .
Cooking quality attributes are known to be affected by both genetic and environmental factors. It has been reported that salinity stress up-regulates rice storage proteins (glutelin, prolamin, globulin, and albumin), consequently impacting cooking qualities 35 . Modulation of storage protein composition and starch accumulation alters significantly under stress conditions, critically influencing rice elongation ratio and volume expansion through MARK signaling pathway 36 . Findings from the current study further highlight how environmental conditions can significantly alter cooking-related traits. Our results are consistent with the findings of Obata et al 36 ., confirming that the elongation ratio increased significantly under all treatments in all varieties, with S, COM and CDAS showing the most pronounced effects and volume expansion increased markedly in SB varieties compared to all varieties.
Arsenic is known to affect silicon transport and cooking properties such as increasing curling grains, bursting grains, reducing elongation ratio 37 . Differences between varieties in aquaporin expression affect how much arsenic is absorbed, while the plant nodes help block As (III) from moving into the grains, reducing its buildup 38 . The observed change in our study might be linked with this phenomenon.
Environmental stress disrupts starch deposition, reducing amylose content and other grain qualities 39 . Amylose synthesis is mediated by granule-bound starch synthase I (GBSSI), encoded by reduction 40 . Interestingly, amylose content of the study grains was significantly reduced by stress treatments, particularly S and COM in SB and S and CD in KS, while AS had a moderate effect across varieties except BG. According to Umadevi et al. 43 ., gel consistency shows a significant negative correlation with both volume expansion ratio and water uptake 41 . Rice varieties with low gelatinization exhibit poor kernel elongation, volume expansion, and water uptake, leading to decreased consumer preference 42 . The observed intra- and inter-varietal variations in gel consistency (GC) values across locations may stem from either starch polymer aggregation forming rigid rice gels 9 or the interactive effects of minor genes (waxy, BEIII, pullulanase) and potential arsenic exposure, though this requires further validation 43 . Additionally, OsBadh2 suppresses 2-acetyl-1-pyrroline (2-AP) production, consequently reducing gel consistency under cadmium stress conditions 27 . Salt treatment increased gel hardness in SB and AT, while it softened the gel in KS. In BG, gel consistency was altered only by the treatment CDAS, shifting from soft to hard through above mentioned pathway in study grain. Rice aroma is primarily regulated by the Osbadh2 gene, which functions under homozygous recessive conditions and enhances 2-acetyl-1-pyrroline (2AP) production but reduces salt stress tolerance due to its dual role in arsenic stress response 27 . The aromatic variety SB lost aroma by all treatments while COM induced aroma to BG and COM, CD induced aroma in KS while COM reduced aroma in AT.
Overall, our finding revealed that during genotypic performance KS variety showed best performance by showing tolerance to other except CD and COM. Therefore, we hypothesize that the salt tolerant variety KS-282 maintains salinity tolerance through coordinated regulation of ROS and homeostasis. Under salt stress, OsRbohA and OSCA genes (OsOSCA1.2, OsOSCA3.1) mediate Ca²⁺ influx and ROS/NO signaling, while higher activities of ascorbate peroxidase and catalase prevent prolonged ROS accumulation during grain formation. Stress-responsive transcription factors OsSERF1 and OsDREB2A are activated exclusively in KS-282, supporting adaptive gene expression. In addition, early and strong induction of genes maintaining a high K⁺/Na⁺ ratio stabilizes ionic balance. Together, these mechanisms suggest that KS-282 tolerance is driven by controlled ROS signaling, efficient antioxidant defense, transcriptional regulation, and potassium homeostasis. However, this hypothesis is matching with author Fukuda et al 35 . in study. The variations in genotypes in response to salt stress could be due to the accumulation and changes in activities of starch synthetic enzymes. In KS-282, salt tolerance may be mediated by the upregulation of starch-synthetic enzymes such as granule-bound starch synthase and starch branching enzymes. This enhances starch and amylopectin accumulation, supporting grain filling under salt stress. Further, our findings align with the hypothesized mechanisms of KS-282 tolerance to As. The genes AsTol6.1, AsTol6.2, and AsTol10.1 act epistatically to confer arsenic tolerance. Plasma membrane intrinsic proteins OsPIP2;4, OsPIP2;6 and OsPIP2;7 enhance As³⁺ tolerance during short-term exposure. These transporters may also play an important role in overall tolerance. In addition, exogenous auxin improves As³⁺ tolerance in rice, suggesting its role in reducing arsenic stress.
In contrast, the finding for the susceptibility of KS-282 to Cd stress is matching with Obata et al. 36 to uncontrolled Cd uptake and poor detoxification. In this variety, Cd entry through transporters such as OsNRAMP5, OsIRT1, and OsZIP family members may not be well restricted. Weak sequestration in root vacuoles and reduced binding to cell wall components or thiol compounds (phytochelatins, glutathione) allow more Cd to move to shoots and grains via OsHMA2. Once accumulated, Cd triggers excessive ROS production. The low activity of antioxidant enzymes such as SOD, CAT, and APX fails to prevent oxidative damage. Cd also disturbs nutrient balance and suppresses key metabolic genes like OsPKs, disrupting energy metabolism. This process is influenced by MAPK signaling through auxin variation and changes in cell cycle-related and hormonal regulation during grain filling. Together, these mechanisms likely explain the reduction in grain weight, size, and overall quality under Cd stress. Due to Cd susceptibility KS might have shown susceptibility to COM stress. In addition, stress risk assessment showed that COM stress had a much more severe effect, as multiple mechanisms were triggered when stresses were combined. However, further molecular experiments are needed to explore this in detail.
This study reveals that abiotic stresses S, CD, AS, SAS, SCD, CDAS, COM significantly impair rice quality traits, including milling yield, grain physical properties, cooking behavior, and functional attributes. The COM having the most severe impact, particularly on BG and SB varieties, which showed high susceptibility to quality degradation. The KS and AT variety demonstrated greater resilience, with KS maintaining stability in milling and physical traits and AT exhibiting tolerance in cooking and functional properties. Physical grain traits were severely compromised under COM, CDAS, and SCD, though AT showed relative stability, while cooking traits varied stress-dependently, displaying negative correlations between volume expansion and bursting grains but positive links to stickiness. Functional properties were most affected by COM and CDAS, with variety-specific responses revealing SB as most impacted by SCD, BG by AS, KS by CD, and AT by COM across all traits. Ultimately, KS emerged as the most adaptable variety across all quality domains, followed by AT (excelling in cooking traits), whereas, SB, despite being aromatic and texturally desirable under control conditions, were the most vulnerable to stress-induced quality deterioration. Further research should focus on molecular and physiological investigations to elucidate the underlying mechanisms conferring resilience in KS and AT. Integrating omics approaches can accelerate the key biomarkers associated with grain quality maintenance and can provide genetic resources for future breeding programs.
Four indica rice varieties were used in this study, comprising two Pakistani varieties Super Basmati (SB), Kala Shahkaku 282 (KS), and two Sri Lankan varieties Ambalanthota AT 362 (AT), Bathalagaoda BG 94/1 (BG). The seeds of Pakistani and Sri Lankan rice varieties were provided by the National Agriculture Research Center (NARC) and Rice Research Station, Sammanthurai, Sri Lanka respectively. Seeds were sown in June 2024 at the National Institute of Genomics and Advanced Biotechnology, NARC, Islamabad, Pakistan. Pots of 2′ height and 2′ diameter size, (200 in number) were filled with 2 kg of peat moss and soil mixture in a 1:1 ratio. Seeds were soaked and transferred to Hoagland based hydroponic media and after 14 days, 6 seedlings were transferred into each pot 30 . The plants were grown in natural field conditions. Panicle initiation was monitored, and abiotic stress treatments were imposed when approximately 50% of the plants had reached panicle formation stage. From four rice varieties line, 24 healthy pots were selected per variety, and three pots were allocated for each treatment. Eight pots, including control, were used per replicate, with each treatment replicated three times. Stress treatments were prepared in liquid form, including 150 mM sodium chloride (NaCl),300µM cadmium (CdCl 2 ), 250µM sodium arsenite (Na 2 AsO 3 ), as well as dual combinations (S + AS), (S + CD), (CD + AS), and a triple stress combination (COM). One liter of each solution was directly applied to designated pots. Plants were allowed to reach maturity, and grain samples were harvested from three plants in each pot, in early October 2024. Three replicates were used for each treatment group. The harvested grains were air dried and stored at room temperature for three months. Subsequently, milling quality, physical quality, cooking properties, functional traits, and sensory attributes were evaluated with modifications 44 .
The harvested control and treated paddies (250 in number) were weighted and milled at Food Science Research Institute (FSRI), National Agricultural Research Centre (NARC), Islamabad, Pakistan using a Paddy Husker Machine, Model KHL-250, Mitsubishi Electric Automation (Thailand) Co, Ltd. The weight of brown rice milled rice, and head rice were determined according to the standards of FSRI. The degree of milling and head rice yield were calculated based on the method described with slightly modifications 20 .
DoM=(1 – (Wt. of polished or milled rice/Wt. of brown rice)*100.
HRY= (Wt.of head rice/Wt. of paddy rice)*100.
The physical parameters, like average length(L), width(W), whiteness index, length/breadth(B) (L/B) ratio, colour index (CI), chalkiness(C) of the control and treated paddy and head rice(kernel) were determined by placing grains in the Micron Epson perfection v600 photo scanner at FSRI, NARC, Islamabad, Pakistan and following FSRI standards. Grain thickness (T) was measured for ten randomly selected grains from each variety by using digital Vernier caliper. The geometric mean diameter (GMD), arithmetic means diameter (AMD), and equivalent diameter (ED), grain volume (V), surface area (Sa), breadth(B) sphericity (Sp), aspect ratio (Ra), size (S), and free space were calculated using the formulas provided by 45 . The moisture was measured using Moisture analyzer PM-450 at FSRI and classification of rice were by followed by the 46 . The bulk density (BD) of paddy and kernel were determined using the protocol outlined 47 . A pre-weight cylinder filled with one hundred grains or paddy were filled and leveled. The bulk density of paddy and kernels were calculated as the ratio of mass to volume occupied. The protocol for measuring true density using 20cm 3 of toluene displaced by the kernels was followed as described by Qadir and Wani 2023. The porosity of kernels and paddy was calculated using the specified formula 47 .
Geometric Mean Diameter, GMD= (LWT) 1/3
Arithmetic Mean Diameter, AMD= (L + W + T)/3
Equivalent Diameter, ED=[L(W + T) 2 /4] 1/3
Free space = Surface area of paddy – Surface area of kernel
Bulk density (BD) = Mass of sample/Total volume
True density (TD) = Mass of sample/Volume of displaced toluene (cm 3 )
The water displacement method was used to determine the volume expansion by measuring cylinder. About 3 g of rice grains were poured into the measuring cylinder containing 30 ml water and the total volume was observed (A). Then an initial increased volume was recorded (A-30). After that, the same grains were soaked for 20 min and cooked for 60 min in a water bath at 90 °C. Then the 3 g cooked rice were placed in 30 ml water taken in 100 ml measuring cylinder. Subsequently, an increase in volume of water (B) was measured and a volume raise was recorded (B-30). The volume expansion ratio was calculated as described by slight modifications 48 .
The initial length of ten grains was measured using a scalar or slide caliper. The same grains were then soaked for 20 min and subsequently cooked for 30 min. After cooking, the length of each intact grain was measured again. Then the average length was calculated by dividing the total length by number of grains. The elongation ratio was determined by divining the average length of cooked grains by the average length of the raw grains. Additionally, the percentage of grains exhibiting bursting, curling and stickiness was calculated by multiplying the number of affected grains by 49 .
Freshly milled rice powder (1 g) from each variety was mixed with 10 mL of 1.7% KOH, covered, kept at room temperature for 1 h and then assessed for aroma by an expert panel 50 .
Gel consistency was measured following a modified method 51 . Rice flour (0.1 g) was mixed with 0.026 ml of 95%ethanol containing 0.025% thymol blue was added to each tube and mixed thoroughly. The mixture was gently vortexed, followed by the addition of 2 ml of 0.2 N KOH, vortexed again. The tubes were then placed in a boiling water bath at 92 °C for 7–10 min, cooled at room temperature for 5 min, and subsequently transferred to an ice bath for 15–20 min. After cooling, the tubes were placed horizontally on clean graph paper on a flat laboratory bench for 30–60 min to allow gel formation. Gel length was measured and categorized (Supplementary table S6). All tests were performed in triplicate to ensure accuracy 52 .
Amylose content was determined using the modified method of 52 . Rice powder (0.1 g) was gelatinized with 1 ml, 95% ethanol and 9 ml of 1 N NaOH were added. The mixture was boiled in the water bath for 10 min to gelatinize the starch and allowed it to cool, diluted to volume, and reacted with 1 ml of 1 N acetic acid and 2 ml of iodine. After 20 min, absorbance at 620 nm was measured, and amylose content was calculated from a standard curve with modified method 48 .
Alkali digestion was evaluated following Prakash et al. 48 with minor modifications. Ten head rice grains per variety were incubated in 1.7% KOH at 30 ° C for 24–25 h. Disintegration was visually rated using IRRI standard evaluation system (Supplementary table S7) with tests performed in triplicate for accuracy.
A preference test was conducted to evaluate the overall adaptability of paddy varieties under multiple abiotic stress conditions. The questionnaire was designed to assess which variety performed best based on integrated results from milling properties, physical appearance, cooking characteristics, and functional traits. The relative risk associated with each abiotic stress treatment was assessed for all varieties to identify the most detrimental conditions. A rating system was applied to all seven stress treatments across the evaluated parameters, including milling properties, physical characteristics, cooking quality, and functional traits 27 .
All experiments were conducted in triplicate. Data were analyzed using two-way ANOVA with repeated measures and multiple comparisons, employed by GraphPad Prism (version 10.4.2(633) and R language (version 4.3.3). This approach was chosen due to the inclusion of four varieties and eight including control and treatment and varying numbers of traits with a significant level (α) of 0.05. Tukey’s test (α = of 0.05) was used to identify significant differences among samples 29 . All the graphs were generated using R and the data reduction was performed through principal component analysis (PCA), heatmap, cluster dendrogram. Additionally, Pearson correlation analyses were conducted to assess relationships between varieties and treatments 53 .
The datasets used and/or analyzed during the current study are available from the first author and corresponding authors on reasonable request.
Felton, M. et al. Farmers’ attitudes towards, and intentions to adopt, agroforestry on farms in lowland South-East and East England. Land use policy 131 , 106668 (2023).
Bin Rahman, A. N. M. R. & Zhang, J. Trends in rice research: 2030 and beyond. Food Energy Secur. 12 , e390 (2023).
Sun, Y., Chen, J. & Zhu, L. Phthalate esters decreased nutritional value of rice grains via redirecting glycolytic carbon flow from grain quality formation toward antioxidative defense. J Hazard. Mater 488 , 137358 (2025).
Alam, M. et al. Improving Rice Grain Quality Through Ecotype Breeding for Enhancing Food and Nutritional Security in Asia–Pacific Region. Rice 17 , (2024).
Hu, Z. et al. Natural variation of an E3 ubiquitin ligase encoding gene Chalk9 regulates grain chalkiness in rice. Nat. Commun. 16 (2025).
Lu, Z. et al. Grain quality characteristics analysis and application on breeding of Yuenongsimiao, a high-yielding and disease-resistant rice variety. Sci. Rep. 13 (2023).
Wang, S. et al. Control of grain size, shape and quality by OsSPL16 in rice. Nat. Genet. 44 , 950–954 (2012).
Galani, Y. J. H. et al. Effects of combined abiotic stresses on nutrient content of European wheat and implications for nutritional security under climate change. Sci. Rep. 12 , 5700 (2022).
Article ADS CAS PubMed PubMed Central Google Scholar
Zhou, Z., Robards, K., Helliwell, S. & Blanchard, C. Composition and functional properties of rice. Int. J. Food Sci. Technol. 37 (8), 849–868. https://doi.org/10.1046/j.1365-2621.2002.00625.x (2002).
Li, Z. et al. Effects of Salt Stress on Grain Yield and Quality Parameters in Rice Cultivars with Differing Salt Tolerance. Plants 12, (2023).
Li, M. et al. QTL mapping and candidate gene analysis of element accumulation in rice grains via genome-wide association study and population genetic analysis. BMC Plant. Biol. 25 , 93 (2025).
Article PubMed PubMed Central Google Scholar
Radha, B. et al. Physiological and molecular implications of multiple abiotic stresses on yield and quality of rice. Front. Plant Sci. 13 . https://doi.org/10.3389/fpls.2022.996514 (2023).
Liberatore, C. M., Biancucci, M., Ezquer, I., Gregis, V. & Di Marzo, M. Investigating how reproductive traits in rice respond to abiotic stress. J. Exp. Bot. 76 , 2064–2080 (2025).
Article CAS PubMed PubMed Central Google Scholar
Song, W. E. et al. Variation of cd concentration in various rice cultivars and derivation of cadmium toxicity thresholds for paddy soil by species-sensitivity distribution. J. Integr. Agric. 14 , 1845–1854 (2015).
Imran, M. et al. Nitric oxide confers cadmium tolerance in fragrant rice by modulating physio-biochemical processes, yield attributes, and grain quality traits. Ecotoxicol Environ. Saf 261 , (2023).
Kanu, A. S. et al. Cadmium uptake and distribution in fragrant rice genotypes and related consequences on yield and grain quality traits. J Chem (2017). (2017).
Halford, N. G., Curtis, T. Y., Chen, Z. & Huang, J. Effects of abiotic stress and crop management on cereal grain composition: implications for food quality and safety. J. Exp. Bot. 66 , 1145–1156 (2015).
Moulick, D. et al. Interrelationship among rice grain Arsenic, micronutrients content and grain quality attributes: an investigation from genotype × environment perspective. Front Environ. Sci. 10 , 1–17 (2022).
Razzaq, A. et al. Salt stress induces physiochemical alterations in rice grain composition and quality. J. Food Sci. 85 , 14–20. https://doi.org/10.1111/1750-3841.14983 (2020).
Zheng, C. et al. Effect of salinity stress on rice yield and grain quality: A meta-analysis. European J. Agronomy 144 , 1–9 (2023).
Ishfaq, M. et al. Influence of water management techniques on milling recovery, grain quality and mercury uptake in different rice production systems. Agric Water Manag 243 , (2021).
Dangthaisong, P., Sookgul, P., Wanchana, S., Arikit, S. & Malumpong, C. Abiotic stress at the early grain filling stage affects Aromatics, grain quality and grain yield in Thai fragrant rice (Oryza sativa) cultivars. Agricultural Res. 12 , 285–297 (2023).
Ali, F., Jighly, A., Joukhadar, R., Niazi, N. K. & Al-Misned, F. Current Status and Future Prospects of Head Rice Yield. Agriculture (Switzerland) vol. 13 Preprint at (2023). https://doi.org/10.3390/agriculture13030705
Limmer, M. A. & Seyfferth, A. L. Altering the localization and toxicity of arsenic in rice grain. Sci Rep 12 , (2022).
Jiang, Y. et al. Regulation of Drought and Salt Tolerance by OsSKL2 and OsASR1 in Rice. Rice 15, (2022).
Yao, D. et al. Effects of Salinity Stress at Reproductive Growth Stage on Rice (Oryza sativa L.) Composition, Starch Structure, and Physicochemical Properties. Front Nutr 9 , 926217 (2022).
Yamaguchi, N. et al. Role of the node in controlling traffic of cadmium, zinc, and manganese in rice. J. Exp. Bot. 63 , 2729–2737 (2012).
Xue, D. et al. Comparative proteomic analysis provides new insights into cadmium accumulation in rice grain under cadmium stress. J. Hazard. Mater. 280 , 269–278 (2014).
Gao, Y., Duan, Z., Zhang, L., Sun, D. & Li, X. Toxics 794 (2022).
Zhang, S. et al. Natural variation of OsWRKY23 drives difference in nitrate use efficiency between indica and japonica rice. Nat. Commun. 16 , 1420 (2025).
Zhang, Y. M. et al. A rice QTL GS3.1 regulates grain size through metabolic-flux distribution between flavonoid and lignin metabolons without affecting stress tolerance. Commun Biol 4 , 1171 (2021).
Fukuda, A. et al. Function, Intracellular localization and the importance in salt tolerance of a vacuolar Na+/H + Antiporter from rice. Plant. Cell. Physiol. 45 , 146–159 (2004).
Article ADS CAS PubMed Google Scholar
Obata, T., Kitamoto, H. K., Nakamura, A., Fukuda, A. & Tanaka, Y. Rice shaker potassium channel OsKAT1 confers tolerance to salinity stress on yeast and rice cells. Plant. Physiol. 144 , 1978–1985 (2007).
Senanayake, R. M. N. H., Herath, H. M. V. G., Wickramesinghe, I. P., Udawela, U. A. K. S. & Sirisena, D. N. Phenotypic screening of rice varieties for tolerant to salt stress at seed germination, seedling and maturity stages. Trop. Agric. Res. 29 , 90 (2017).
Nádvorníková, M., Banout, J., Herák, D. & Verner, V. Evaluation of physical properties of rice used in traditional Kyrgyz cuisine. Food Sci. Nutr. 6 , 1778–1787 (2018).
Chen, Y., Wang, M. & Ouwerkerk, P. B. F. Molecular and environmental factors determining grain quality in rice. Food Energy Secur . 1 , 111–132. https://doi.org/10.1002/fes3.11 (2012).
Kamaraddi, V. & Prakash, J. Assessment of suitability of selected rice varieties for production of expanded rice. Cogent Food Agric 1 , 1112675 (2015).
Chen, H. et al. Effective methods to reduce cadmium accumulation in rice grain. Chemosphere 207 , 699–707 (2018).
Fahad, S. et al. Elsevier,. Abiotic stress and rice grain quality. in Advances in Rice Research for Abiotic Stress Tolerance 571–583 (2018). https://doi.org/10.1016/B978-0-12-814332-2.00028-9
Liu, C. et al. Identification of genes for salt tolerance and yield-related traits in rice plants grown hydroponically and under saline field conditions by genome-wide association study. Rice 12 , 88 (2019).
Umadevi, M., Veerabadhiran, P., Manonmani, S. & Shanmugasundaram, P. Physico-Chemical and Cooking Characteristics of Rice Genotypes . Electronic J. Plant. Breeding 1 , 114–123 (2010).
Moses, M. O., Aishat, A. B. & Olanrewaju, O. M. Suitability of dimensional, physical and physicochemical properties of selected eight improved rice (oryza sativa l.) varieties for extrusion cooking. Food Biophys. 20 . https://doi.org/10.1007/s11483-024-09902-1 (2025).
Zhou, G. et al. Performance of yield, photosynthesis and grain quality of Japonica rice cultivars under salinity stress in micro-plots. Chin. J. Rice Sci. 32 , 146–154 (2018).
Guo, Y. et al. Effects of high temperature at grain filling stage on grain quality and gene transcription in heat-sensitive versus heat-tolerant rice cultivars. Agron. 15 (2025).
Qadir, N. & Wani, I. A. Physical properties of four rice cultivars grown in Indian temperate region. Appl. Food Res. 3 , 100280 (2023).
Prakash, O., Jha, S. K., Kar, A., Sinha, J. P., Satyavathi, C. T. & Iquebal, M. A. Physical properties of pearl millet grain as a function of moisture content. (2020). Retrieved from https://www.researchgate.net/publication/340869811_Physical_Properties_of_Pearl_Millet_Grain_as_a_function_of_Moisture_content
Paksoy, M. & Aydin, C. Some physical properties of edible squash (Cucurbita Pepo L.) seeds. J. Food Eng. 65 , 225–231 (2004).
Umar Farooq, M. S., Diwan, J. R., Mahantashivayogayya, K., Kulkarni, V. V. & Shakuntala, N. M. Genetic evaluation of rice (Oryza sativa. l) genotypes for yield and nutritional quality traits. J. Experimental Biology Agricultural Sci. 7 , 117–127 (2019).
Khan, U., Amin, F., Mujtaba, G., Mehr, P. & Shah, A. Quality evaluation of various rice (Oryza sativa L.) varieties. https://doi.org/10.21746/aps.2021.10.12.4 doi:10.21746/aps.2021.10.12.4.
Seraj, S., Hassan, L., Begum, S. & Sarker, M. Physico-chemical attributes and correlation among grain quality traits of some exotic aromatic rice lines. J. Bangladesh Agricultural Univ. 11 , 227–232 (2014).
Chemutai, L. R., Musyoki, M. A. & Kioko, W. F. Physicochemical characterization of selected rice (Oryza Sativa L.) genotypes based on gel consistency and alkali digestion. Biochem. Anal. Biochem. 5 , 285 (2016).
Open, A., Anjum, K. I. & Hossain, M. A. Access Peer-Reviewed International Journal Article Code: 0232/2019/RALF Article Type . Original Research Res. Agric. Livest. Fish vol. 6 www. (2019). agroaid-bd.org/ralf .
Awasthi, S., Chauhan, R., Srivastava, S. & Tripathi, R. D. The journey of arsenic from soil to grain in rice. Front. Plant Sci. 8 . https://doi.org/10.3389/fpls.2017.01007 (2017).
The authors gratefully acknowledge FSRI and NIGAB at NARC for providing the facilities and support necessary to conduct this research. The support of Ms Saira Mushtaq, employee at FSRI is highly appreciated. The authors acknowledge the support of Allama Iqbal Scholarship Programme/Pak-Sri Lanka Higher Education Cooperation to Ms Sulthan Rifasa.
The authors received no funding for this work.
Department of Biosciences, COMSATS University Islamabad, Islamabad Campus, Pakistan
Sulthan Rifasa, Muhammad Zeeshan Hyder, Sumaira Farrakh, Ayesha Tahir & Tayyaba Yasmin
National Institute for Genomics and Advanced Biotechnology (NIGAB), NARC, Park Road, Islamabad, 45500, Pakistan
Muhammed Ramzan Khan & Muhammed Uzair
Food Science Research Institute, National Agricultural Research Center, Islamabad, Pakistan
Search author on: PubMed Google Scholar
Sulthan Rifasa: Conceptualization, Investigation, Methodology, Formal analysis, Writing - Original Draft, Writing - Review & Editing. Muhammed Ramzan Khan: Formal analysis, Review & Editing, Validation Muhammed Uzair: Investigation, Validation, Writing - Review & Editing Amir Mumtaz: Formal analysis, Methodology, Validation, Review and Editing Muhammad Zeeshan Haider: Supervision, Review and Editing Sumaira Farrakh: Supervision, Review and Editing Ayesha Tahir: Formal analysis, Writing - Review & Editing Tayyaba Yasmin: Investigation, Methodology, Formal analysis, Writing - Review & Editing, Supervision.
Correspondence to Muhammed Ramzan Khan or Tayyaba Yasmin .
The authors declare no competing interests.
The research conducted is not related to either human or animal use.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Below is the link to the electronic supplementary material.
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ .
Rifasa, S., Khan, M.R., Uzair, M. et al. Differential grain quality responses of rice varieties under combined salt, cadmium and arsenic stresses. Sci Rep 15 , 45502 (2025). https://doi.org/10.1038/s41598-025-29746-0
Version of record : 30 December 2025
DOI : https://doi.org/10.1038/s41598-025-29746-0
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
© 2026 Springer Nature Limited
Loading comments…